AdhesionAgglomeration formationBack IonizerBoothBrightness/GlossContaminationDischargingEconomyEdge build-upFlakingFluidizingGun arrangementGun functionLevel sensorMaintenance workNozzles"Orange peel"Picture frame effect"Pin pricks"Pit formationPowder containerPowder depositing on an objectPowder output irregularPowder separation degreePowder separantion degree of the cyclonePulsingSieve problemsStripe formationUneven coatingYellowing

Problem: Maintenance work

CauseRemedies
The quality of your coating, and the length of the working life of the plant components depend greatly on the reliability of the maintenance of your plant. The following maintenance work must be carried out regularly: 
DAILY
  • Blow out the guns, and check for sintering
  • Check the setting of the spraying unit
  • Keep the gun conveying air pressure low
  • Check the injectors (caking / abrasion in the sleeve)
  • Blow out the injectors, and hoses
  • Clean the plant, recovery equipment, and surroundings
  • Check the suction resistance of the powder recovery unit
WEEKLY
  • Check the grounding
  • Check if the compressed air is clean, dry, and free from oil
  • Check the current performance of the gun
  • Check the powder hoses for sintering, and kinking
  • Check the stroke movement, and display
  • Check the filter system
© 2024 by Gema Switzerland Gmbh - All rights reserved | General Conditions of Sales | Conditions of Purchase | Legal Notice | Privacy Policy
design by easy graphics ag